Plumbing solutions from WTI Drains
Drainage
Stainless shower channels, point drains, balcony and polymer concrete drainage.
Load classes
K3
Indoor, 300 kg, EN 1253
A15–E600
Exterior, EN 1433
- A15Pedestrian areas
- B125Light vehicular
- C250Heavier vehicular
- D400Carriageways
- E600Industrial / high wheel loads
Designed and manufactured to comply with EN 1253 and EN 1433. Third-party certification and CE marking are in progress; no mark is claimed.
- 8-acreJaipur site, at Mahindra World City
- 200+People across the group
- 5Divisions, WTI Drains among them
- 1993Year the group was founded
- ExportsShipped beyond India
Shower and wet-room floors
Linear channels
Five grate patterns on one SS304 / SS316 channel body, for walk-in showers, wet rooms, hotel bathrooms and hospital sanitary areas.
- Lengths600 / 700 / 800 / 900 mm, or made to order
- Section75 mm wide, 25 mm high
- OutletW-70 Ø50 mm, vertical
- LoadK3 (300 kg), EN 1253

Lineo
For walk-in showers and wet rooms where the drain stays in view next to large-format stone or porcelain.
- Grate
- Linear slot pattern
- Lengths
- 600 to 900 mm

Drop
For premium bathrooms and villa projects with stone or large-format tile; the circle pattern reads as a decorative band.
- Grate
- Geometric circle pattern
- Lengths
- 600 to 900 mm

Oval
For wet rooms and hotel showers where a strongly linear grate texture matters, above all against linear-format tile.
- Grate
- Strongly linear texture
- Lengths
- 600 to 900 mm

Rectanglo
For contemporary bathrooms with geometric tile layouts; a dense, precision-punched slot field follows the paving grid.
- Grate
- Precision-punched slot field
- Lengths
- 600 to 900 mm

Tileo
For bathrooms that need a tile-flush drain on the finished floor: the floor tile goes into the channel.
- Grate
- Tile insert, flush finish
- Tile
- Up to 12 mm thick
Single floor points
Single-point drains
Square SS304 / SS316 gullies for compact bathrooms, utility floors and secondary showers, plus a triangular model.
- Square100 / 125 / 150 mm
- Frame7 to 40 mm height adjustment
- OutletVertical
- LoadK3 (300 kg), EN 1253

Point-Rectanglo
For compact bathrooms, utility areas and secondary showers where the floor layout does not justify a full linear channel.
- Sizes
- 100, 125, 150 mm square
- Height
- 25 mm

Point-Oval
For secondary bathrooms, powder rooms and utility floor points, with a geometric grouped-slot grate.
- Sizes
- 100, 125, 150 mm square
- Height
- 25 mm

Point-Tileo
The invisible point drain: pair it with a Tileo channel elsewhere on the floor, or use it alone where hiding the drain matters most.
- Sizes
- 100, 125, 150 mm square
- Tile
- Up to 18 mm

Point-Trianglo
A triangular grate for walk-in showers and wet rooms where the drain is specified in that shape.
- Size
- 350 × 250 mm
- Height
- 30 mm

Point-Squaro
For minimalist bathrooms and utility wet areas where a geometric, modular grate suits the room better than a slot field.
- Sizes
- 100, 125, 150 mm square
- Height
- 25 mm
Balconies and terraces
Fall in the channel
Each 1 m balcony channel carries a 2 mm internal fall while its grating sits dead flat. Three channels end to end give a continuous 6 mm fall to the outlet, with the slope kept across the joints.
Match the load class to the traffic on the finished surface.

Tile Insert Double Slot
A stainless channel that sits flush with balcony tile, with the slope built into the channel instead of the screed. The double-slot tile-insert grating keeps the surface reading as tile, not as a drain line.
Length, width, depth, outlets and corners can be customised on request.
- Material
- SS304 standard, or SS316L
- Section
- 150 mm wide, 50 mm high
- Length
- 1000 mm per channel
- Slots
- 2 × 12 mm
- Fall
- 2 mm inside each channel
- Outlet
- Vertical or horizontal, Ø50 / 75 / 110 mm
- Standard
- EN 1433, same published classes as exterior
Driveways, plazas, parking and kerbs
Polymer concrete channels
One polymer concrete channel body takes four grate variants. Against precast concrete it has higher compressive strength, negligible water absorption and no ferrous corrosion path, and it resists de-icing salts, fuel spills and wash-down chemicals.
- Sizes55×100, 100×100, 150×150, 200×200, 300×300 mm
- Length1000 mm
- GratesStainless steel or ductile cast iron
- A1515 kN
- B125125 kN
- C250250 kN
- D400400 kN
- E600600 kN
EN 1433 runs from A15 to F900; the WTI exterior range is published from A15 to E600.

SS Single Slot
For residential driveways, pool surrounds and pedestrian plazas, where a discreet drain line matters more than maximum flow.
- Grate
- Stainless steel slot
- Body
- Polymer concrete, 1000 mm

SS Double Slot
For parking areas, basement ramps and campuses where surface water volumes are higher and one narrow slot would undersize the inlet.
- Grate
- Two stainless steel slots
- Body
- Polymer concrete, 1000 mm

SS Trianglo Slot
For landscaped courtyards, pool decks and entrance plazas, where the drain run is on show and should look considered.
- Grate
- Stainless steel, triangle pattern
- Body
- Polymer concrete, 1000 mm

Ductile Iron
For kerbside and road-edge runs, parking and basement ramps under vehicles, where the grate takes repeated wheel loading.
- Grate
- Ductile cast iron
- Body
- Polymer concrete, 1000 mm
Specifying drainage
Send the drainage layout
Share the floor plans, the wet areas and the traffic each run will carry, and we will match channel, grate and load class to the project. Material and performance data are available on request.
+91 99588 03531info@windowtechs.inSend us the project
Explore products on wtidrains.com (opens brand site)
Every product and brochure is on wtidrains.com.

Quick links
Products Categories
Follow us
Copyright 2026 © Window Techs. All Rights Reserved.
Designed & Managed By Attain Mach33 LLP